Material for creating Laminated and Mounted Graphics

1.7mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please ccontact wideformat@lindenmeyr.com for quotation.

1.7mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

1.7mil thermal laminating film for encapsulation of offset prints, black/white copies and most color copies. Melts at 250 degrees with a recommended feed rate of 8-10ft per minute with brake tension. Available on 1in, 2.25in or 3in core rolls, core size are noted in price list below. Extreme bond and custom sizes are available, please contact us for quotation.

1.7mil thermal dry erase film is a LO-Melt UV polyester film for creating dry erase boards.  3in core poly-in, melt between 200-230 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

1.7mil thermal laminating film is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

10mil Crystal Matte UV Laminate is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  Scratch resistant textured finish, perfect for trade show graphics.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

10mil hard coat UV Laminate is a LO-Melt UV polyester film for encapsulation or digital inkjet prints. Scratch resistant smooth finish, perfect for trade show display graphics. 3in core poly-in, melts between 185-210 degrees. Speed of 3-4ft./min with light brake tension on common heat roller laminator.

10mil thermal laminating film for encapsulation of offset prints, black/white copies and most color copies. Melts at 230 degrees with a recommended feed rate of 2-4ft per minute with brake tension. Available on 1in, 2.25in or 3in core rolls, core size are noted in price list below. Extreme bond and custom sizes are available, please contact us for quotation.

10mil Opaque Backer is 100% opaque white polyester.  Product is on a 3in core.

10mil thermal laminating film is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  3in core poly-in, melts between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

3mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

3mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

3mil thermal laminating film for encapsulation of offset prints, black/white copies and most color copies. Melts at 230 degrees with a recommended feed rate of 6-8ft per minute with brake tension. Available on 1in, 2.25in or 3in core rolls, core size are noted in price list below. Extreme bond and custom sizes are available, please contact us for a quotation.

3mil Opaque Backer is 100% opaque white polyester.  Product is on a 3in core.

3mil thermal dry erase film is a LO-Melt UV polyester film for creating dry erase boards.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

3mil thermal laminating film is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

3mil thermal laminating film is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

3mil thermal laminating film is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

5mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

5mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

5mil hard coat UV Laminate is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  Scratch resistant smooth finish, perfect for trade show graphics.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

5mil thermal laminating film for encapsulation of offset prints, black/white copies and most color copies. Melts at 230 degrees with a recommended feed rate of 4-6ft per minute with brake tension. Available on 1in, 2.25in or 3in core rolls, core size are noted in price list below. Extreme bond and custom sizes are available, please contact us for quotation.

5mil Opaque Backer is 100% opaque white polyester.  Product is on a 3in core.

5mil thermal laminating film is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

6mil Crystal Matte UV Laminate is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  Scratch resistant textured finish, perfect for trade show graphics.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

Star Media Bio-Degradable PSA Laminate - GLOSS is a 3mil over-laminating film consists of a certified biodegradable bio plastic laminating film with an aqueous (water-based) adhesive.  The film has an attractive gloss finish.  Recommended for use with recyclable printable media and mount boards.

Star Media Bio-Degradable PSA Laminate - MATTE is a 3mil over-laminating film consists of a certified biodegradable bio plastic laminating film with an aqueous (water-based) adhesive.  The film has an attractive matte finish.  Recommended for use with recyclable printable media and mount boards.

Star Media Bio-Degradable PSA Textured Laminate is a 6.6mil over-laminating film with a pebble textured satin finish. The scuff-resistant, pebble textured finish makes this laminating film suitable for graphics where extensive handling may be involved.

Star Media Eco-Mount Adhesive is an economical, clear, carrier-free, permanent mounting adhesive. By eliminating the carrier this mounting adhesive becomes environmentally degradeable and recyclable, yet performs as well as more traditional adhesives. Eco-Mount is recommended for use with flexible substrates, pre-coating board or in combination with Eco-Board to reduce the impact graphics have on the environment.

Star Media Heat Assist Gloss - Satinex is a high quality 3mil heat set laminate with a semi-gloss finish on a 3in core.  Note: use minimal brake tension to avoid excessive curl.