You are here:Home > Shop By Department > Laminate
Choose a sub category:
Eco-Friendly Heat Assist Narrow Format
Pressure Sensitive Thermal

Thermal, PSA Pressure Sensitive & Heat Assist Film Laminate for Narrow and Wide Format Laminators.

Need help selecting a product? Contact one of our wide format specialists at wideformat@lindenmeyr.com

Sort By:
Page of 2
1.7mil Thermal Laminating Film Gloss 1.7mil Thermal Laminating Film Gloss

1.7mil thermal laminating film is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  3in core poly-in, melt between 185-210 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

PSA Gloss Economy Laminate PSA Gloss Economy Laminate

Star Media PSA Gloss Economy is a high quality 3.2mil pressure sensitive laminate on a 3in core.  PVC UV film with a water based acrylic adhesive.

PSA Luster Economy Laminate PSA Luster Economy Laminate

Star Media PSA Luster Economy is a high quality 3.2mil pressure sensitive laminate on a 3in core.  PVC UV film with a water based acrylic adhesive.

PSA Matte Economy Laminate PSA Matte Economy Laminate

Star Media PSA Matte Economy is a high quality 3.2mil pressure sensitive laminate on a 3in core.  PVC UV film with a water based acrylic adhesive.

PSA Dry Erase PSA Dry Erase

Star Media PSA Dry Erase is a high quality 1mil pressure sensitive polypropylene laminate for creating dry erase boards.  Product is on a 3in core.

PSA Textured Scratch PSA Textured Scratch

Star Media PSA Textured Scratch is a high quality 5mil pebble finish pressure sensitive polypropylene laminate.  Apply over Printable Opaque to create rollable trade show graphics and banner stands.  Curl resistant construction with floor graphic certification.  Product is on a 3in core.

PSA Textured Scratch Economy 10mil PSA Textured Scratch Economy 10mil

Star Media PSA Textured Scratch is a high quality 10mil pebble finish pressure sensitive polypropylene laminate.  Apply over Printable Opaque to create rollable trade show graphics and banner stands.  Simulates polycarbonate.  Product is not rated for floor graphics.  Product is on a 3in core.

PSA Textured Scratch Economy 5mil PSA Textured Scratch Economy 5mil

Star Media PSA Textured Scratch is a high quality 5mil pebble finish pressure sensitive polypropylene laminate.  Apply over Printable Opaque to create rollable trade show graphics and banner stands.  Simulates polycarbonate.  Product is not rated for floor graphics.  Product is on a 3in core.

PSA Cast Gloss PSA Cast Gloss

Star Media PSA Cast Gloss is a high quality 2mil pressure sensitive laminate for vehicle graphics.  Product is on a 3in core.

PSA Cast Lustre PSA Cast Lustre

Star Media PSA Cast Lustre is a high quality 2mil pressure sensitive laminate for vehicle graphics.  Product is on a 3in core.

PSA Cast Matte PSA Cast Matte

Star Media PSA Cast Matte is a high quality 2mil pressure sensitive laminate for vehicle graphics.  Product is on a 3in core.

PSA Cast Optically Clear PSA Cast Optically Clear

Star Media PSA Cast Optically Clear is a high quality 2mil pressure sensitive laminate on a smooth polyester liner.  Recommended for one way vision window graphics.  Product is on a 3in core.

PSA Polycarbonate 5mil PSA Polycarbonate 5mil

Star Media PSA Polycarbonate is a high quality 5mil clear polycarbonate laminating film with a velvet pebble finish, coated on one side with a pressure sensitive, solvent acrylic adhesive. The finish is durable and scratch resistant. Ideal for pop-up booths and exhibit back-walls. Can be used with Star Media backing films to create rigid, yet rollable graphic panels. Product is on a 3in core.

PSA Polycarbonate 10mil PSA Polycarbonate 10mil

Star Media PSA Polycarbonate is a high quality 10mil clear polycarbonate laminating film with a velvet pebble finish, coated on one side with a pressure sensitive, solvent acrylic adhesive. The finish is durable and scratch resistant. Ideal for pop-up booths and exhibit back-walls. Can be used with Star Media backing films to create rigid, yet rollable graphic panels.  Product is on a 3in core.

PSA Polycarbonate 15mil PSA Polycarbonate 15mil

Star Media PSA Polycarbonate is a high quality 15mil clear polycarbonate laminating film with a velvet pebble finish, coated on one side with a pressure sensitive, solvent acrylic adhesive. The finish is durable and scratch resistant. Ideal for pop-up booths and exhibit back-walls. Can be used with Star Media backing films to create rigid, yet rollable graphic panels. Product is on a 3in core.

PSA Opaque Backer 10mil PSA Opaque Backer 10mil

Star Media PSA Opaque Backer 10mil is 100% opaque white.  Apply to the back of reverse print polycarbonate for trade show graphics.  Product is rollable and is on a 3in core.

PSA Opaque Backer 16mil PSA Opaque Backer 16mil

Star Media PSA Opaque Backer 16mil is 100% opaque white.  Apply to the back of reverse print polycarbonate for trade show graphics.  Product is rollable and is on a 3in core.

Heat Assist Gloss Satinex Heat Assist Gloss Satinex

Star Media Heat Assist Gloss - Satinex is a high quality 3mil heat set laminate with a semi-gloss finish on a 3in core.  Note: use minimal brake tension to avoid excessive curl.

Heat Assist Textured Scratch Heat Assist Textured Scratch

Star Media Heat Assist Textured Scratch is a high quality 5mil heat set laminate with a pebble finish on a 3in core.  Note: use minimal brake tension to avoid excessive curl.

3mil Thermal Laminating Film GLOSS 3mil Thermal Laminating Film GLOSS

3mil thermal laminating film for encapsulation of offset prints, black/white copies and most color copies.  Melts at 230 degrees with a recommended feed rate of 6-8ft per minute with brake tension.  Available on 1in, 2.25in or  3in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

1.7mil Thermal Laminating Film GLOSS 1.7mil Thermal Laminating Film GLOSS

1.7mil thermal laminating film for encapsulation of offset prints, black/white copies and most color copies.  Melts at 250 degrees with a recommended feed rate of 8-10ft per minute with brake tension.  Available on 1in, 2.25in or  3in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

5mil Thermal Laminating Film GLOSS 5mil Thermal Laminating Film GLOSS

5mil thermal laminating film for encapsulation of offset prints, black/white copies and most color copies.  Melts at 230 degrees with a recommended feed rate of 4-6ft per minute with brake tension.  Available on 1in, 2.25in or  3in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

10mil Thermal Laminating Film GLOSS 10mil Thermal Laminating Film GLOSS

10mil thermal laminating film for encapsulation of offset prints, black/white copies and most color copies.  Melts at 230 degrees with a recommended feed rate of 2-4ft per minute with brake tension.  Available on 1in, 2.25in or  3in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

1.7mil Extreme Bond Thermal Laminate Gloss 1.7mil Extreme Bond Thermal Laminate Gloss

1.7mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

1.7mil Extreme Bond Thermal Laminate Matte 1.7mil Extreme Bond Thermal Laminate Matte

1.7mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

3mil Extreme Bond Thermal Laminate Matte 3mil Extreme Bond Thermal Laminate Matte

3mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

3mil Extreme Bond Thermal Laminate Gloss 3mil Extreme Bond Thermal Laminate Gloss

3mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

5mil Extreme Bond Thermal Laminate Gloss 5mil Extreme Bond Thermal Laminate Gloss

5mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

5mil Extreme Bond Thermal Laminate Matte 5mil Extreme Bond Thermal Laminate Matte

5mil Extreme Bond thermal laminating film for encapsulation of digital prints and color copies with high fuser oil content.  Melts at 250-270 degrees with a recommended feed rate of 8-10ft per minute with light brake tension.  Available on 1in and 2.25in core rolls, core size are noted in price list below.  Extreme bond and custom sizes are available, please contact KFi for quotation.

1.7mil Thermal Laminating Film Matte 1.7mil Thermal Laminating Film Matte

1.7mil thermal laminating film is a LO-Melt UV polyester film for encapsulation or digital inkjet prints.  3in core poly-in, melt between 200-230 degrees.  Speed of 3-4ft./min with light brake tension on common heat roller laminator.

   
 

Shop our store for deals on Wide Format Inkjet Media, Film Laminate & Mounting Adhesive